Buzzer on night time setting

[John Kelly]

Hi, Is there a way I can disable the buzzing sound my alarm makes when I switch on the downstairs zone at night. I have it set for 30 secs to allow me to escape upstairs when set. It would be better if it was silent at it wakes up the kids sometimes? Thanks

[Admin]

There should be an option to part-set the system. This will leave the infrared detector off at night. I presume this is why you need the timer on?

Depending on the type of HKC alarm system you have installed, there are a few different ways to try this. If it is a Securewatch system you could try using the command 0#7 or 0#8 . Let me know how this goes & what model os alarm system it is.

[Admin]

hello John , I was checking as to the was your alarm system is configured. In most cases 0#7 would be a silent & instant part set. Your alarm system has a timed part set to allow you to pass the detector on the way upstairs.
A silent part set can only be done by changing some of the settings on your alarm to exclude that zone during a part set & setting the command 0#7 to silent.
These changes can only be made in engineer mode. Do you have the engineer code for your alarm system?
(factory code = 1234)