Astec 63 alarm needs resetting

[tinggg]

Hi

Just moved into a house with a Astec 63 alarm and no one knows the 'old' alarm code. I need to get the alarm reset so that I can use it.

I have called around some alarm shops and none of them deal with this model.

Does anyone know how I can manually reset the alarm myself or know of an alarm shop or electrician who I can call to come out and reset.

The house is in Phibsboro, Dublin 7.

Any help much appreciated.
Nick

[Admin]

You could try defaulting the system to factory settings. If this does not work then the panel is engineer locked. Let me know & we can send you details of who can reset it for you.

1> Remove mains power from the panel
2> Remove Battery link (After last terminal on the right
3> Remove Factory Link LK1 (before first terminal on the left)
4> Reconnect mains power to the system
5> Enter clear 4711 If the system has been reset then this code should disarm it. If so then enter 1174 to enter engineer mode.
6>Replace Factor & battery links

Please note under new legislation you must only emply licenced aAlarm installers to work on your Alarm System. Anyone we recommend would be licenced.

[tinggg]

Thanks Colm, will try what you suggest and will get back to you if I can't do it.

Cheers

[tinggg]

Hi

After looking further at this I think i'd prefer to get in a proper alarm installer. I would be grateful if you could suggest someone who might be able to work with this type of alarm.

Many thanks

[Admin]

Sent you a PM